Epson SC-T5100 User Manual

B
Display the Printer Settings tab of the printer
driver and select Auto Sheet Feeder in Source.
U “Basic Operating Procedures (Windows)”
on page 46
C
Display the Layout tab of the printer driver and
select the 2-sided printing check box.
Note:
❏ If you click Margin Setting, you can set
Binding Edge and Binding Margin. Perform
a test print because the set binding margin
width and the actual print result may dier
depending the application used.
❏ Selecting the Folded Booklet check box
enables printing to make a booklet. In the
example in the gure below, the pages that
will be on the inside when the paper is folded
into two (pages 2, 3, 6, 7, 10, and 11) are
printed rst.
D
Check other settings, and then start printing.
E
When the guide screen appears aer printing of
the odd pages is
nished,
load the paper again
following the instructions on the screen and
then click Resume.
SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series User's Guide
Printing with the Printer Driver from Your Computer
81

Epson SC-T5100 Specifications

General

Maximum Print Resolution	2400 x 1200 dpi
Memory	1 GB
Operating Systems	Windows, macOS
Print Technology	PrecisionCore MicroTFP
Ink Type	UltraChrome XD2
Connectivity	Ethernet
Paper Sizes	A4, A3, A2, A1, B4, B3, B2, B1
Print Margin Roll	3 mm (top), 3 mm (right), 3 mm (bottom), 3 mm (left)
Emulations	ESC/P Raster
Display	4.3-inch color LCD touchscreen
Print Speed Draft Mode	22 sec/A1 on plain paper
Media Types	Plain Paper, Matte Paper, Tracing Paper, Fine Art Paper, Photo Paper, Coated Paper
Number of Ink Colors	4 (Cyan, Magenta, Yellow, Black)