Loading Transparencies
When printing on transparencies, please note the following:
❑
Before loading transparencies, remove the paper support
and reinstall it into the slots at the back of the printer as
shown below.
❑
Always put a support sheet or a sheet of plain paper under
the stack of transparencies.
❑
You can load up to 10 transparencies.
❑
Make sure the printable surface of the paper is face up
when loading transparencies into the sheet feeder. See the
illustration on page 6-4.
❑
Select
Ink Jet Transparencies
as the Media Type setting in
the printer driver. For more details on making printer
driver settings, see online help for Windows, or Chapter 5
for Macintosh.
new-29
6
R
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 6
05-20-97 DR, pass 0
Printing on Special Paper
6-7
To Next Page
Loading...
