When using your printer with a Macintosh
The following are the hardware and system requirements that
must be met to use this printer with a Macintosh.
Applicable computer models (as of July 1, 1996)
Macintosh LC II, LC III, LC475, LC520, LC575, LC630
Macintosh IIcx, IIci, IIsi, IIvi, IIvx
Macintosh Quadra Series
Macintosh Centris Series
Macintosh PowerBookď›› Series (excluding PowerBook 100)
Macintosh PowerBook Duo Series
Macintosh Performa Series
Power Macintosh Series
Interface cables
To use your printer with a Macintosh, you need a standard
Apple System Peripheral-8 cable (8-pin mini-circular
connector) or equivalent.
Environment
Minimum system Recommended system
System 7.1 System 7.5 or later
3MB of available memory 8MB or more of available memory
1
R
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 1
05-20-97 DR, pass 0
Getting to Know Your Printer
1-5
To Next Page
Loading...
Need help?
General