Using the Automatic Setting
When Automatic is selected on the Main menu, the printer
driver takes care of all detailed settings according to the Media
Type and Ink settings you make (see page 4-10 for details on
the Media Type settings). If you leave Mode set to Automatic,
Media Type and Ink are the only settings you need to check
yourself. Most Windows applications feature paper size and
page layout settings which override similar settings on the
Paper menu, but if your application does not, you should also
check the items on the Paper menu.
Note:
If you choose Plain Paper, Photo Quality Ink Jet Paper, Photo
Quality Glossy Paper or Photo Quality Glossy Film as the
Media Type setting while Automatic is selected, a slide bar appears in
the Mode box that lets you choose Quality or Speed. Select Quality
when print quality is more important than speed.
Online help provides more information about the printer driver
settings. See page 4-17 for instructions on using online help.
slideco
L
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 4
05-29-97 DR, pass 0
4-6
Using the Printer Software for Windows
To Next Page
Loading...
Need help?
General