Default settings
The table below shows the default settings that take effect when the
printer is initialized.
Item Default setting
Top-of-form position Current paper position
Page length Single sheets: 22 inches
Left and right margins Cancelled
Line spacing 1/6-inch line spacing
Character pitch Last font selected using default-setting
mode
Vertical tab position Cleared
Horizontal tab positions Every eight characters
Font selection Last font selected using default-setting
mode
Special printing effects Cancelled (except condensed and
economy printing)
User-defined character set Hardware/control panel initialization:
cleared
Software initialization: deselected only
L
Fiji2 Ref. Guide
Rev.b
A5 size Appendix c
05-29-97 DR, pass 0
C-10
Specifications
To Next Page
Loading...
