Aligning the Print Head
When you find that the printed image is fuzzy or the vertical lines in your
printout are not properly aligned, you may need to align the print head
with the EPSON Print Head Alignment Utility. This utility aligns the print
head to print images clearly. You may need to align the print head when
you transport the printer or move it to a different environment.
To install this utility on your hard drive, insert the EPSON Printer
Software CD-ROM into your CD-ROM drive and then type D:\SETUP at
the DOS prompt. (If your CD-ROM driver has a different drive letter, or if
you are using the floppy version, substitute it for D:\.) Follow the
directions on the screen. After running the setup program, change to the
drive and directory that contains the utility (or set the path to the
directory). Then type EPCALIB and press Enter. The following window
appears:
Make sure your printer is selected. Click Next, then follow the directions
on the screen.
Note:
This utility is designed to be run in DOS with or without a mouse.
calib01
A
R
Fiji2 Ref. Guide
Rev.b
A5 size Appendix A
05-20-97 DR, pass 0
Using the Printer with DOS
A-7
To Next Page
Loading...
Need help?
General