Printing with a Macintosh
To get started printing right away, follow the printing method
explained below, which is typical of many Macintosh
applications. The actual way you print may vary depending on
the application you use. See your application manual for
details. If you are printing from Windows applications, see the
previous section.
Note:
While many Macintosh applications override the settings made with
the printer driver, some do not, so you must verify the settings to get
the results you expect.
1. From your application, open the document you want to print.
2. Choose
Page Setup
from the File menu. This brings up the
dialog box shown below.
3. Select the paper size you loaded in the printer from the
Paper Size list.
4. Check the Orientation option for Portrait or Landscape
orientation.
Note:
Always load paper into the sheet feeder short edge first. Load
envelopes flap edge first with the flap side down.
image4
L
Fiji2 Ref. Guide
Rev. b
A5 size Chapter 3
05-20-97 DR, pass 0
3-8
Starting to Print
To Next Page
Loading...
Need help?
General