Serial interface
The printer’s built-in serial interface is based on the RS-423 standard. This
interface has the following characteristics:
Standard: Based on RS-423
Synchronization: Synchronous
Bit rate: Approx. 900K bps
Handshaking: X-ON/X-OFF DTR protocol
Word format:
Data bit 8 bits
Parity bit None
Start bit 1 bit
Stop bit 1 bit
Connector: 8-pin mini-circular connector
Recommended cable: Apple System Peripheral-8 cable
(Part number M0197)
C
R
Fiji2 Ref. Guide
Rev.b
A5 size Appendix c
05-29-97 DR, pass 0
Specifications
C-13
To Next Page
Loading...
Need help?
General