System Requirements
When using your printer with a PC
To use your printer, you need Microsoft Windows 3.1,
Windows for Workgroups, Windows 95, Windows NT 4.0, or
DOS; and a shielded, twisted-pair parallel cable. For system
requirements and details on using the printer software with
Windows NT, see the
Windows NT 3.51/4.0 Printer software
User’s Guide
.
To install and use the printer software (printer driver and
utilities) included on the CD-ROM or floppy disk packed with
your printer, the following is required:
Minimum system Recommended system
80386/16 MHz processor Pentium processor
16MB RAM 32MB RAM
20MB hard disk space More than 50MB free hard disk space
VGA monitor VGA or better monitor
If you decide to use the EPSON Answers online guide included
with your printer software, your system should also meet the
following requirements:
❑
At least 20MB of free disk space for full program installation
❑
Double-speed CD-ROM drive (Quad-speed or faster
recommended)
Your computer dealer can help you update your system if it
does not meet these requirements.
L
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 1
05-20-97 DR, pass 0
1-4
Getting to Know Your Printer
To Next Page
Loading...
Need help?
General