EPSON Status Monitor
The Status Monitor utility helps you to keep track of the
printer, and it alerts you if there are any problems. You can also
check how much ink is remaining before printing and while
printing. When you install the printer software for Windows
95, the Status Monitor is automatically copied to your hard disk.
Note:
The Status Monitor is only available for Windows 95.
The Status Monitor utility is available only when the printer is
connected directly to the host computer. You cannot use this
utility when printing over a network.
When you send a print job to the printer, the Status Monitor
will appear in the Despooler dialog box. For information on the
Despooler dialog box, see “Understanding the EPSON Spool
Manager” on page 4-15.
The Status Monitor provides information about the printer
status as shown by the icons below.
Checking the printer status.
An error has occurred. Your printer cannot print. Check
your printer.
The printer is ready.
The printer is printing.
The ink level is low or out.
L
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 4
05-29-97 DR, pass 0
4-14
Using the Printer Software for Windows
To Next Page
Loading...
Need help?
General