When you clean the print head using the Head Cleaning
utility, the output quality does not improve.
Cause What to do
You attempted to clean the
print head while one or both
of the ink cartridges were low
or out of ink.
Check the
B
and
A
ink out lights.
When one or both of the ink cartridges
are low or out, the Head Cleaning
utility has no effect. Replace the ink
cartridges as needed. See page 8-2.
Increasing the Print Speed
Just as printing at a high resolution requires more processing
time, printing in color takes longer than printing in black
because the volume of data in a color document is much
greater. For this reason, it is important to be selective in your
use of color if you also require a faster print speed.
Even if your document requires the highest resolution and
extensive use of color, for example when printing a
camera-ready composite that includes color photographs, it
may still be possible to optimize the print speed by adjusting
other printing conditions. Keep in mind that changing some
conditions to increase the print speed may also lower print
quality.
The following table shows the factors that inversely affect print
speed and print quality (increasing one will decrease the other).
Print quality
Print speed
Lower
Faster
Higher
Slower
Printer software settings
Print Quality Economy SuperFine-1440 dpi
High Speed On Off
Halftoning No halftoning Error Diffusion
L
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 8
05-29-97 DR, pass 0
8-24
Troubleshooting
To Next Page
Loading...
Need help?
General