To replace an ink cartridge, follow these steps.
1. Make sure the printer is on. The
P
power light should be
on, but not flashing. Determine which cartridge
needs to be replaced as indicated by the
B
black and
A
color ink out lights.
Note:
If you press the
R
cleaning button for three seconds when
the
B
and
A
ink out lights are off, the printer starts cleaning the
print head.
2. Make sure the output tray at the front of the printer is
lowered; then open the printer cover.
3. Hold down the
R
cleaning button for three seconds until
the print head moves left slightly to the cartridge
replacement position. The
P
power light flashes when the
print head is in position.
c
Caution:
Do not move the print head by hand. Always use the
R
cleaning button to move it. Otherwise you may damage
the printer.
new5a
7
Maintenance
R
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 7
05-20-97 DR, pass 0
Maintenance and Transportation
7-3
To Next Page
Loading...
