9. Press the
R
cleaning button then close the printer cover. The
printer moves the print head and begins charging the ink
delivery system. This process takes about two minutes to
complete.
When the ink charging process is finished, the printer returns
the print head to its home position and the
P
power light
stops flashing.
c
Caution:
The
P
power light continues to flash while the printer
performs the ink charging operation. Never turn off the
printer while this light is flashing. Doing so can result in
incomplete charging of ink.
Note:
Even if you do not press the
R
cleaning button, the printer
moves the print head and begins the ink charging process about
60 seconds after you replace the ink cartridge.
7
Maintenance
R
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 7
05-20-97 DR, pass 0
Maintenance and Transportation
7-7
To Next Page
Loading...
