Epson Stylus color 600 User Manual

Lights Problem and Solution
Paper Out
nS
No paper is loaded in
the printer.
Load paper in the sheet feeder;
then press the
E
load/eject button
to turn this light off. The printer
resumes printing.
The paper is not
loaded correctly.
Remove and reload the paper; then
press the
E
load/eject button to turn
this light off. The printer resumes
printing.
Paper Jam
fS
oB
oI
Paper has jammed in
the printer.
Take all the paper out of the sheet
feeder, reload the paper, then press
the
E
load/eject button. If the light
continues to flash, turn off the printer
and gently pull out any paper that
may be jammed in the printer. If it
tears and pieces remain inside the
printer, open the printer cover and
remove the pieces of paper. Turn on
the printer and try again.
Ink Low (black ink cartridge)
fB
The black ink cartridge
is nearly empty.
Obtain a replacement black ink
cartridge (S020093). See page xx for
details.
Ink Out (black ink cartridge)
nB
The black ink cartridge
is empty.
Replace the black ink cartridge with
a new one (S020093). See page xx
for details.
Ink Low (color ink cartridge)
fI
The color ink cartridge
is nearly empty.
Obtain a replacement color ink
cartridge (S020089). See page xx for
details.
Ink Out (color ink cartridge)
nI
The color ink cartridge
is empty.
Replace the color ink cartridge with
a new one (S020089). See page xx
for details.
n = on, o = off, f = flashing
8
Troubleshooting
R
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 8
05-29-97 DR, pass 0
Troubleshooting
8-3

Epson Stylus color 600 Specifications

General

Brand	Epson
Model	Stylus color 600
Category	Printer
Language	English