Epson Stylus color 600 - Page 128

4. Hold down the
E
load/eject button and press the
P
power
button to turn the printer on. Then release both buttons.
The printer prints an operation check page including the
version of your printer’s ROM, the ink counter code, and a
nozzle check pattern. Here is a typical printout:
The above sample is in black and white, but the actual test prints in color.
5. Press the
P
power button to turn off the printer after it
finishes printing the operation check page.
e15
L
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 8
05-29-97 DR, pass 0
8-6
Troubleshooting