4. Click the Background Printing radio buttons to turn
background printing on or off.
When background printing is on, you can use your
Macintosh while it is preparing a document for printing.
You must turn on background printing to use the EPSON
Monitor2 utility to manage print jobs. For more
information, see “Using the EPSON Monitor2 Utility” in
Chapter 5.
5. Close the Chooser.
Your Macintosh will check that the printer is connected
correctly. If the following message appears, follow the
instructions on the screen, click
OK
, and repeat the steps above.
picture5
L
Fiji2 Ref. Guide
Rev.b
A5 size Chapter 2
05-29-97 DR, pass 0
2-26
Getting Started
To Next Page
Loading...
