Using the Printer Software for DOS
12-1
Chapter 12
Using the Printer Software for DOS
Installing the Printer Driver for DOS Programs . . . . . . . . . . . . . . 12-1
Changing the Print Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-2
Changing the default settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-3
Using Built-in Fonts and Character Tables . . . . . . . . . . . . . . . . . . 12-3
Installing the Printer Driver for DOS Programs
Most DOS software programs include a driver for EPSON
ESC/P 2™ printers and require that you select the printer from a
list to install the printer driver. To take advantage of your printer's
advanced, built-in, scalable fonts and graphics handling, you
must select an appropriate driver.
If your printer is not included in the list, contact your software
manufacturer to obtain updated software.
If the manufacturer does not have an updated printer driver for
your printer, select an alternative printer from those listed below,
choosing the printers listed at the top first.
When printing in black only:
LQ-870/1170
LQ-570 (+)/1070(+)
SQ-870/1070
LQ-850
LQ-500
When printing in black and color:
To Next Page
Loading...
