PAPER FEED
1. Feeding method Friction feed with ASF
2. Line spacing 1/6 inch or programmable at 1/360
3. Paper path cut-sheet ASF (front enter, front out)
4. Feed speed 2.36 inch/sec. normal/ continuous
4.5 inch/sec. fast/continuous
PAPER
o Cut-sheets
size: A4 210(W) x 297mm (L) (8.3 x 11.7”)
Letter 216 x 279mm (8.5 x 11.0”)
B5 182 x 257mm (7.2 x 10.1”)
Legal 216 x 356mm (8.5 x 14.0”)
Statement 139.7 x 215.9mm (5.5 x 8.5”)
Executive 184.2 x 266.7mm (7.25 x 10.5”)
Photo paper 101.6 x 152.4mm (4 x 6”)
thickness: 0.08~0.11mm (0.003~0.004”)
weight: 64g/m
2
~90g/m
2
(17~24lb.)
quality: Exclusive paper, bond paper, PPC
o OHP sheets, Glossy paper
size: A4 210(W) x 297mm (L) (8.3 x 11.7”)
Letter 216 x 279mm (8.5 x 11.0”)
thickness: 0.075~0.085mm (0.003~0.0033”)
NOTE: Transparency printing is only supported at normal temperature.
o Envelopes
size: No.10 241(W) x 104.8mm (H) (9.5 x 4.125”)
DL 220 x 110mm (8.7 x 4.3”)
C6 162 x 114mm (6.4 x 4.5”)
thickness: 0.16~0.52mm (0.006~0.02”)
weight: 45g/m
2
~75g/m
2
(12~20lb.)
quality: Exclusive paper, bond paper, Air mail
Figure 1-1. Printable Area for Envelopes
NOTE: Envelope printing is only supported at normal temperature.
Load long edge first.
o Index cards
size: A6 index 105(W) x 148mm (L) (4.1 x 5.8”)
A5 index 148 x 210mm (5.8 x 8.3”)
Table 1-3. Envelope Margin
Size
Left Margin
(min.)
Right Margin
(min.)
Top Margin
(min.)
Bottom Margin
(min.)
#10 3 mm (0.12”) 28 mm (1.10”) 3 mm (0.12”) 14 mm (0.55”)
DL 3 mm (0.12”) 7 mm (0.28”) 3 mm (0.12”) 14 mm (0.55”)
C6 3 mm (0.12”) 3 mm (0.12”) 3 mm (0.12”) 14 mm (0.55”)
Printable Area
LM
RM
TM
BM
To Next Page
Loading...
Need help?
General
