192
Import/Export Settings
Imports or exports all the settings on the printer driver as a file. This is used for Install Assistant
to create the install package of the printer driver.
[Maintenance And Utilities] tab
Make the following settings to the printer.
Post-Printing Verification Settings
Changes settings of operation, registration of invalid images to the documents, test printing of
invalid images at missing dots.
Following are the modes for operation setting when Post-Printing Verification Settings.
•Anti-missing Color Mode: Executes cleaning when two or more dots are miss
ing
side by side in the paper feed direction, or three or more
dots are missing arbitrarily.
•Anti-missing Read Mode: Executes a head cleaning when any dot is missing.
•High Reliabi lity Mode (Reprint) / Economy Mode for Low Print Volume (Reprint):
When dot missing occurs, the EPSON Status Monitor 3 is
displayed. Select the
next operation from [Restart print-
ing] (printing the next data) and [Reprint] (reprinting
after dot missing is resolved by the auto head cleaning.)
•High Reliability Mode (Void Image Reprint) / Economy Mode for Low Print Volume (Void
Image Print):
Prints the image that indicates dot missing and reprint
s
the same data when any dot is missing. Cuts and prints
the top of the void images if the paper height is less than
one inch.
This makes it easier to use the same settings in other printers.
• The button for [High reliability mode (Void Image Test Print)] or [Economy Mode for Low
Print Volume (Void Image Print)] on [Driver Preferences] is grayed out when [Use
EPSON Status Monitor 3] on [Driver Preferences] of [Driver Utilities] is not selected.
• The dots may be missing due to mis-reading when “Anti-missing Color Mode” is
selected. It is recommended to use “Anti-missing Read Mode” or “High Reliability Mode”
to avoid such dot missing from mis-reading.
To Next Page
Loading...
Need help?
General