Chapter 4 Handling
193
4
Notification Settings
Makes settings of the buzzer on/off, LED notification at the ink low status and the paper type
error notification when such error occurs.
Panel Button Settings
Among the panel buttons on the printer, enable/disable the FEED button and the CUT button.
Media position detection
Changes the media position detection setting based on the type of paper.
Media Loading Settings
Changes settings of the paper set operation and auto-cut function when powering on and closing
the cover.
Sensor Adjustment
The threshold for the sensor can be adjusted when the sensor does not detect the label gap and
black mark for the paper to be used.
Manual Head Cleaning
Head cleaning can be performed. The result of the head cleaning can be checked by the nozzle
check pattern printing.
Nozzle Check
Prints a nozzle check pattern to check if any nozzle is clogged or not.
The volume for the buzzer notification (high/low) can be set by the DIP switch 8. (See "Set-
ting the DIP Switches" on page 77)
The paper error occurs when the printer setting is not matched with the paper type and
printing can not be performed. See "Loading/Replacing the Paper" on page 79 for details
about this adjustment.
See "Manual Head Cleaning" on page 201 for the operating procedure of the Manual head
cleaning.