Chapter 2 Setup
83
2
3. Removing the paper feed guide
This procedure is not required when the paper is initially loaded to the printer or the paper type
is not changed (roll paper/fanfold paper).
1
Press down the release lever, and pull it to the front to open the roll
paper cover.
2
If the paper feed guide is attached into the grooves inside of the roll
paper cover, remove it.
3
Close the roll paper cover.
Attach the paper feed guide to the printer only when using the fanfold paper. Be sure to
remove the paper feed guide when using the roll paper.
To Next Page
Loading...
Need help?
General