44
Selection of print speed
Selectable from levels 1 to 11 (Slow – Fast)
Default setting: level 6
Automatic Paper Reduction
Reduction of top margin
•Does not reduce
• Reduces
Reduction of bottom margin
•Does not reduce
• Reduces
Reduction of line spacing
•Does not reduce
• Reduces 25%
• Reduces 50%
• Reduces 75%
• Reduces the most (68* model only)
Reduction of line spacing where extra line feeds are included
•Does not reduce
• Reduces 25%
• Reduces 50%
• Reduces 75%
Reduction of bar code heights
•Does not reduce
• Reduces 25%
• Reduces 50%
• Reduces 75%
• Printing speed may be slower, depending on items such as the print data, head
temperature, and energization parting.
• If white lines are caused by intermittent printing (printing sometimes stops) in graphics
printing, etc., set the print speed at low speed or, for serial interface models, set the
communication speed at high speed to prevent white lines.
To Next Page
Loading...
