Epson VT6-A901S Maintenance Manual

VT6L Maintenance 16. LED Plate
VT series Maintenance Manual Rev.2 127
16. LED Plate
WARNING
■
To shut off power to
the robot system, disconnect the power plug from the power
source. Be sure to connect the power cable to a power plug.
DO NOT connect it directly to a factory power source.
■
Before performing any replacement procedure, turn OFF the Controller and
related equipment, and then disconnect the power plug from the power source.
Performing any replacement procedure with the power ON is extremely hazardous
and may result in electric shock and/or malfunction of the robot system.
LED Plate

Epson VT6-A901S Specifications

General

Brand	Epson
Model	VT6-A901S
Category	Robotics
Language	English