VT6L Maintenance 7. Covers
VT series Maintenance Manual Rev.2 41
7.6 Power Cable Cover
Standard, Cleanroom model:
Power Cable Cover
2-M4×8 Sems
Power Cable
Cover
Unscrew the mounting bolts, and then lift the Power Cable
Cover.
Power Cable
Cover
Installation
Put the Power Cable Cover to the connector plate and secure with the mounting bolts.
Hexagon socket head cap bolts with captive washer: 2-M4×8 Sems
Tightening torque: 0.9 ± 0.1 Nm
When installing the cover, be careful not to get the cables caught between the
arm and cover
Protection model:
There is no Power Cable Cover.
To Next Page
Loading...
