VT6L Maintenance 2. General Maintenance
8 VT series Maintenance Manual Rev.2
The Manipulator operation hours can be checked in [Controller Status Viewer] dialog box -
[Motor On Hours].
(1) Select EPSON RC+ menu-[Tools]-[Controller] to open the [Controller Tools] dialog
box.
(2) Click the <View Controller Status> button to open the [Browse For Folder] dialog
box.
(3) Select the folder where the information is stored.
(4) Click <OK> to view the [Controller Status Viewer] dialog box.
(5) Select [Robot] from the tree menu on the left side.
For the parts subject to overhaul, refer to “21. Maintenance Parts List”.
For details of replacement of each part, refer to each chapter.
Please contact the supplier of your region for further information.
To Next Page
Loading...
