Epson WorkForce WF-2880 Series - Scanned Image Problems; Straight Lines Appear When Scanning from ADF; The Text or Image Scanned from the ADF Is Squeezed or Stretched; Uneven Colors, Dirt, Spots, and so on Appear When Scanning from the Scanner Glass

Related Information
& “Uninstalling Applications” on page 180
& “Installing the Latest Applications” on page 178
Scanned Image Problems
Uneven Colors, Dirt, Spots, and so on Appear when Scanning from
the Scanner Glass
❏ Clean the scanner glass.
❏ Remove any trash or dirt that adheres to the original.
❏ Do not press with too much force on the original or the document cover. If you press with too much force,
blurring, smudges, and spots may occur.
Related Information
& “Cleaning the Scanner Glass” on page 167
Straight Lines Appear when Scanning from ADF
❏ Clean the ADF.
Straight lines may appear in the image when trash or dirt gets into the ADF.
❏ Remove any trash or dirt that adheres to the original.
Related Information
& “Cleaning the ADF” on page 164
The Text or Image Scanned from the ADF is Squeezed or Stretched
Some originals may not be scanned properly from the ADF. Place originals on the scanner glass.
Related Information
& “Placing Originals on the Scanner Glass” on page 50
Solving Problems > Scanned Image Problems > The Text or Image Scanned from the ADF is Squeezed or Stretched
205