Epson WorkForce WF-2880 Series User Manual

5.
When you hear a fax tone, tap
x , and then hang up the handset.
Note:
When a number is dialed using the connected telephone, it takes longer to send a fax because the printer performs
scanning and sending simultaneously. While sending the fax, you cannot use the other features.
6.
When sending is complete, remove the originals.
Related Information
& “Placing Originals” on page 48
& “Fax Settings” on page 141
Various Ways of Sending Faxes
Sending Many Pages of a Monochrome Document (Direct Send)
When sending a fax in monochrome, the scanned document is temporarily stored in the printer's memory.
erefore,
sending a lot of pages may cause the printer to run out of memory and stop sending the fax. You can
avoid this by enabling the Direct Send feature, however, it takes longer to send the fax because the printer
performs scanning and sending simultaneously. You can use this feature when there is only one recipient.
Select Fax on the home screen, select the Fax Settings tab, and then tap Direct Send to set this to On.
Related Information
& “Placing Originals” on page 48
& “Fax Settings” on page 141
Sending Faxes in Monochrome at Specied Time of the Day (Send Fax Later)
You can set to send a fax at a
specied
time. Only monochrome faxes can be sent when the time to send is
specied.
1.
Select Fax on the home screen.
2.
Specify the recipient.
“Recipient” on page 141
3.
Select the Fax Settings tab, and then select Send Fax Later.
4.
Tap the Send Fax Later eld to set this to On.
5.
Select the Time
eld,
enter the time you want to send the fax, and then select OK.
6.
Select OK to apply the settings.
You can also make settings such as the resolution and the sending method as necessary.
Faxing > Sending Faxes Using the Printer > Various Ways of Sending Faxes
125

Epson WorkForce WF-2880 Series Specifications

General

Brand	Epson
Model	WorkForce WF-2880 Series
Category	Printer
Language	English