Epson WorkForce WF-2880 Series - Saving Power; Saving Power - Control Panel

Saving Power
e printer enters sleep mode or turns o automatically if no operations are performed for a set period. You can
adjust the time before power management is applied. Any increase will aect the product's energy eciency. Please
consider the environment before making any change.
Depending on the location of purchase, the printer may have a feature that turns it o automatically if it is not
connected to the network for 30 minutes.
Saving Power - Control Panel
1.
Select Settings on the home screen.
2.
Select General Settings > Basic Settings.
3.
Do one of the following.
❏ Select Sleep Timer or Power O Settings > Power O If Inactive or Power O If Disconnected, and then
make settings.
❏ Select Sleep Timer or Power
O
Timer, and then make settings.
Note:
Your produc t may have the Power O Settings or Power O Timer feature depending on the location of purchase.
Preparing the Printer > Saving Power > Saving Power - Control Panel
62