❏ Originals that are bound
❏ OHPs, thermal transfer paper, or carbon backs
Placing Originals on the ADF
1.
Align the edges of the originals.
2.
Open the ADF document support and extend the ADF output tray extension.
3.
Pinch and slide out the ADF edge guide.
4.
Place the originals face-up in the ADF, and then slide the ADF edge guide to the edge of the originals.
Preparing the Printer
>
Placing Originals
>
Placing Originals on the ADF
49
To Next Page
Loading...
Need help?
General