EasyManuals Logo

Epson WorkForce WF-2910 Series User Manual

Epson WorkForce WF-2910 Series
245 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
5.
Select ADF Continuous Scan, and then select On.
You can also make settings such as the resolution and the sending method in Scan Settings or Fax Send
Settings if necessary.
6.
Press the
button until you are returned to the Fax screen, and then press the
x
button.
7.
When scanning the
rst
originals is complete and the message Send another page? is displayed on the control
panel, select Ye s , load the next originals, and then press the
x
button.
Note:
If you leave the printer untouched for 60 seconds aer prompted to set the next originals, the printer stops storing and
starts sending the document.
8.
When sending is complete, remove the originals.
Sending Many Pages of a Monochrome Document (Direct Send)
When sending a fax in monochrome, the scanned document is temporarily stored in the printer's memory.
erefore, sending a lot of pages may cause the printer to run out of memory and stop sending the fax. You can
avoid this by enabling the Direct Send feature, however, it takes longer to send the fax because the printer
performs scanning and sending simultaneously. You can use this feature when there is only one recipient.
Accessing the Menu
You can nd the menu on the printer's control panel below.
Fax > Menu > Fax Send Settings > Direct Send.
Sending Faxes in Monochrome at a
Specied
Time of the Day (Send Fax Later)
You can set to send a fax at a
specied
time. Only monochrome faxes can be sent when the time to send is
specied.
1.
Place the originals.
2.
Select Fax on the home screen.
To select an item, use the
u
d
l
r
buttons, and then press the OK button.
3.
Specify the recipient.
4.
Make settings to send faxes at a
specied
time.
A
Press the OK button, and then select Fax Send Settings.
B
Select Send Fax Later, and then select On.
C
Enter the time you want to send the fax, and then press the OK button.
You can also make settings such as the resolution and the sending method in Scan Settings or Fax Send
Settings if necessary.
5.
Press the
button until return to Fax screen, and then press the
x
button.
Faxing
>
Sending Faxes Using the Printer
>
Various Ways of Sending Faxes
86

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson WorkForce WF-2910 Series and is the answer not in the manual?

Epson WorkForce WF-2910 Series Specifications

General IconGeneral
Print TechnologyInkjet
FunctionsPrint, copy, scan, fax
Display1.44" color LCD
ConnectivityUSB, Wi-Fi
Paper Handling100-sheet input tray
Compatible InkEpson 212 Black, Cyan, Magenta, Yellow
Print Speed (Black)10 pages per minute
Print Speed (Color)5 ppm (ISO)
Mobile PrintingApple AirPrint
Paper SizesA4, A5, A6, B5, Letter, Legal, Envelopes
Ink Cartridges4 individual cartridges
Print Resolution5760 x 1440 optimized dpi

Related product manuals