Mounting the Chassis
4-6 SmartEdge 1200 Router Hardware Guide
Select the Chassis Alignment
Regardless of rack width and height, mounting positions for the SmartEdge 1200 chassis include:
• Recessed mount—The fan tray and cable tray extend approximately 4.6 inches (11.7 cm) beyond the
front of the rack.
• Flush mount—The fan tray and cable tray extend approximately 7.9 inches (20.1 cm) beyond the front
of the rack.
• Extended mount—The fan tray and cable tray extend approximately 10.1 inches (25.7 cm) beyond the
front of the rack.
• Centered mount—The fan tray and cable tray extend approximately 11.1 inches (28.2 cm) beyond the
front of the rack.
Figure 4-2 shows the positions of the mounting brackets for these positions.
Figure 4-2 Options for Mounting the Chassis
Note Because the fan tray and cable tray extend beyond the front of the rack in any of the four
mounting positions, a rack with a front door might not suitable for the installation unless the
door is removed.
To Next Page
Loading...
