3 MENUS
0460 896 274
- 17 -
© ESAB AB 2013
3.1.5 Weld data memory meny
In the WELD DATA MEMORY menu you can store, recall, delete and copy various set weld
data. The weld data sets can be stored in 255 different memory positions.
For further information, see the “MEMORY MANAGEMENT” chapter.
3.1.6 Fast mode menu
In the FAST MODE menu, you can “link” soft keys to weld data memory positions. These
settings are carried out in the Configuration menu. The number of the selected memory
position is displayed in the top right corner.
For further information, see the “Fast mode soft keys” section.
To Next Page
Loading...
