10 TOOLS
0460 896 274
- 64 -
© ESAB AB 2013
The following information can be read in the error log menu:
• The error number of the error
• The date on which the error has occurred
• The time at which the error has occurred
• The unit in which the error has occurred
• The error's error management code
Units
1 = cooling unit 4 = remote control unit
2 = power source 5 = AC-unit
3 = wire feed unit 8 = control panel
10.1.1 Error code descriptions
Fault code Description
1 Program memory error, (EPROM)
There is a fault in the program memory.
This fault does not disable any functions.
Action: Restart the machine. If the fault persists, send for a service
technician.
2 Microprocessor RAM error
The microprocessor is unable to read/write from/to a certain memory position
in its internal memory.
This fault does not disable any functions.
Action: Restart the machine. If the fault persists, send for a service
technician.
3 External RAM error
The microprocessor is unable to read/write from/to a certain memory position
in its external memory.
This fault does not disable any functions.
Action: Restart the machine. If the fault persists, send for a service
technician.
To Next Page
Loading...
