10 TOOLS
0460 896 274
- 63 -
© ESAB AB 2013
10 TOOLS
Main menu → Tools
This menu contains the following sub-menus:
• Error log
• Export/Import
• File manager
• Edit setting limits
• Edit measurement value settings
• Production statistics
• Quality functions
• User defined synergic data
• Calendar
• User accounts
• Unit information
10.1 Error log
Main menu → Tools → Error log
Fault management codes are used to indicate that a fault has occurred in the welding
process. This is specified in the display with the aid of a popup menu. An exclamation mark
appears in the top right corner of the display.
NOTE!
disappears from the display as soon as you go into the error log menu.
All errors that arise during the use of the welding equipment are documented as error
messages in the error log. Up to 99 error messages can be saved. If the error log becomes
full, i.e. if 99 error messages have been saved, the oldest message is automatically deleted
when the next fault occurs.
To Next Page
Loading...
