8 MEMORY MANAGEMENT
0460 896 274
- 48 -
© ESAB AB 2013
8.7 Name
To give a stored weld data set its own name, proceed as follows:
Select the memory position you want to name and press 2ND FUNCTION. Then press
EDIT.
Press SET to move to WELD DATA SETTING. Select EDIT DESCRIPTION. Press ENTER.
Here you have access to a keyboard that is used as follows:
• Position the cursor on the desired keyboard character using the left-hand knob and the
arrow keys. Press ENTER. Enter a complete character string with a maximum of 40
characters in this way.
• Press DONE to store. The alternative you have named can now be seen in the list.
To Next Page
Loading...
