8 MEMORY MANAGEMENT
0460 896 274
- 46 -
© ESAB AB 2013
Press COPY.
We are now going to copy the content of memory position 5 to position 50.
Use one of the knobs to step to the selected memory position, in this case position 50.
Press YES.
Weld data number 5 has now been copied to memory position 50.
Return to the memory menu with QUIT.
8.6 Edit
To edit the content of a weld data set, proceed as follows:
Select the memory position you want to edit and press 2ND FUNCTION. Then press EDIT.
To Next Page
Loading...
