6 TIG WELDING
0460 896 274
- 39 -
© ESAB AB 2013
1.6 Golden WL15 20 20
1.6 Golden WL15 30 35
2.4 Green WP 45 -
2.4 Green WP 55 60
2.4 Golden WL15 40 40
2.4 Golden WL15 45 50
3.2 Green WP 55 -
3.2 Green WP 65 65
3.2 Golden WL15 60 60
3.2 Golden WL15 70 70
4.0 Green WP 70 75
4.0 Green WP 80 85
4.0 Golden WL15 65 65
4.0 Golden WL15 70 75
WP = Pure tungsten electrode WL15 = Lantha alloyed tungsten electrode.
Electrode preheating is set in the weld data setting menu.
Only applies to TIG welding with AC.
Frequency
Lower frequency (alternating current) transfers more heat to the workpiece and
produces a wider weld pool.
Higher frequency produces a narrower arc with higher arc force (narrower weld
pool).
Frequency is set in the weld data setting menu.
Only applies to TIG welding with AC.
Balance
Setting the balance between the positive (+) electrode and negative (-)
electrode half period during alternating current welding (AC).
Lower balance value produces more heat on the electrode and better oxide
break-up on the workpiece.
Higher balance value produces more heat to the workpiece and better
penetration.
Balance is set in the weld data setting menu.
Only applies to TIG welding with AC.
To Next Page
Loading...
