Need help?Do you have a question about the ESPEC SCP-220 and is the answer not in the manual?
General| Protection Class | IP20 |
|---|---|
| Controller Type | Programmable |
| Display | LCD |
| Communication Interface | RS-232, RS-485 |
| Output Voltage | 24V DC |
| Operating Temperature | 0 to 50°C |
| Storage Temperature | -20 to 60°C |
Describes the functional structure of the setup and monitoring interface.
Details the user interface for controlling constant and program modes.
Explains the organization and components of the instrumentation display.
Displays real-time chamber status including temperature and humidity.
Visualizes historical temperature and humidity data for analysis.
Provides in-depth status and parameter information for the chamber.
Step-by-step guide for setting operational parameters in constant mode.
Configuration options for managing time-based signal outputs.
Configuration of deviation limits for product temperature control.
Instructions for creating new operational programs with defined steps.
Settings for naming programs and defining end-of-program behavior.
Functionality to add new steps within existing program sequences.
Configuration of automatic start and end timers for chamber operations.
Setting critical temperature and humidity alarm thresholds.
System-level settings including communication and general options.
Procedure for initiating operation in the constant mode.
Procedure for initiating operation using a pre-defined program.
Instructions on how to temporarily halt and resume program execution.
To Next Page