ESPEC SCP-220 User Manual

PLATINOUS SERIES CONTROLLER MANUAL
69
6.4. Program Selection
1. Get the Operation Mode Selection screen.
Press either the OPER./START key on the operating panel or the chamber operating status
box on the screen.
2. Get the program and start step selection mode.
Press the PGM No. button under PGM Selection.
3. Input the No. of program to run.
4. Select a start step.
Press the Step No. box. A keypad is laid over the screen to enable input. Make your input
from there.

ESPEC SCP-220 Specifications

General

Brand	ESPEC
Model	SCP-220
Category	Controller
Language	English