PLATINOUS SERIES CONTROLLER MANUAL
67
6.2. Startup in the Constant Mode
1. Get the Operation Mode Selection screen.
Press either the OPER./START key on the operating panel or the chamber operating status
box on the screen.
2. Start operation in the constant mode.
Press the START button under Constant Mode.
3. A message confirming whether to execute the operation or not will be displayed.
Yes button
: Starts testing in the constant mode and returns
the display to the original screen.
No button
: Cancels the command and returns the display to
the Operation Mode Selection screen. The
chamber’s operating status does not change.
To Next Page
Loading...