PLATINOUS SERIES CONTROLLER MANUAL
14
3. Turn humidity control ON/OFF as needed. (For temperature-only chamber only).
Press the m ON box next to Hum. Control to make the setting.
When the dot is yellow: Humidity control is ON.
When dot is black: Humidity control is OFF.
4. Turn product control ON/OFF as needed. (If the chamber includes product control option).
Press the m ON box next to Product Control to make the setting.
When the dot is yellow: Product control is ON.
When dot is black: Product control is OFF.
5. Set refrigerator capacity control.
Select between auto and manual (OFF/20%/50%/100%) control.
Normally, set to auto control.
(Use only OFF or AUTO).
6. Turn the time signals ON/OFF as needed.
Press the m ON box next to Time Signal to make the setting.
When dot is yellow: ON Time signal is output.
When dot is black: OFF Time signal is not output.
Reference
You can name time signals. For details on naming, see “Name Time Signals” in “5.11. Chamber
Configuration”.
3.2. Time Signal ON/OFF
1. Pressing the Time Signal button at the bottom of screen to get the Time Signal ON/OFF
screen.
2. Turn the time signals ON/OFF as necessary.
Press the m ON box next to each time signal to make the setting.
When dot is yellow: ON Time signal is output.
When dot is black: OFF Time signal is not output.
To Next Page
Loading...