ESPEC SCP-220 User Manual

PLATINOUS SERIES CONTROLLER MANUAL
73
6.8. Jump to Next Step
This function suspends the current step and starts the next step of the program.
1. Get the Operation Mode Selection screen.
Press either the OPER./START key on the operating panel or the chamber operating status
box on the screen.
2. Jump to the next step.
Press the NEXT STEP button under Program Mode.
3. A message confirming whether to execute the operation or not will be displayed.
Yes button
: Jumps the program to the next step and returns
the display to the original screen.
No button
: Cancels the command and returns the display to
the Operation Mode Selection screen. The
chamber’s operating status does not change.

ESPEC SCP-220 Specifications

General

Brand	ESPEC
Model	SCP-220
Category	Controller
Language	English