PLATINOUS SERIES CONTROLLER MANUAL
9
2.3. Detail Monitor: Chamber
Table 2.1. Detail Monitor: Chamber Screen
Process Value Displays the value currently monitored inside the
chamber.
Set Point Displays the current control target setting.
Heater % In temperature-controlled operations: Displays
heater output.
In humidity-controlled operations: Displays
humidifying heater output.
Refrig. Control Indicates refrigerator status. (Running/Stop)
Time Signals Indicate time signal output status.
Temperature
Air/Product
Displays the chamber air temperatures if “AIR” is
displayed, displays product temperatures if
“PRODUCT” is displayed. (For details on
air/product temp control, see section 5.11.11.)