PLATINOUS SERIES CONTROLLER MANUAL
41
3. Press the Start and End buttons.
The ball in the Start and End buttons and the CLOCK box along the top of the screen will
turn yellow when the timer is turned ON. At the same time, the details of the ON timer(s) will
be displayed in the display area(s) on the Timer Setup screen.
4. After the timer overflows, the timer is turned OFF automatically.
However, this applies only when 1 Time is set for the Start Mode.
5.3. High/Low Limit Alarm Setup
1. Get the chamber setup mode.
Press the Chamber Setup box on the main menu.
TEMP.
To Next Page
Loading...
Need help?
General
