PLATINOUS SERIES CONTROLLER MANUAL
71
6.6. Pausing in the Program Mode
1. Get the Operation Mode Selection screen.
Press either the OPER./START key on the operating panel or the chamber operating status
box on the screen.
2. Pause the program.
Press the PAUSE button under Program Mode.
3. A message confirming whether to execute the operation or not will be displayed.
Yes button
: Pauses the program and returns the display to the
original screen.
No button
: Cancels the command and returns the display to
the Operation Mode Selection screen. The
chamber’s operating status does not change.
To Next Page
Loading...
Need help?
General
