ESPEC SCP-220 - 4.4. Step Insert

PLATINOUS SERIES CONTROLLER MANUAL
25
When the Save button is pressed
Yes button
: Saves the input data and returns the display to the
Program List screen. If you changed existing
settings, the original data is updated with the new
data.
No button
: Returns the display to the Program Select Edit
screen without saving data updates.
When the Cancel button is pressed
Yes button
: Discards data updates and returns the display to
the Program List screen. The original data is
retained.
No button
: Returns the display to the Program Select Edit
screen.
4.4. Step Insert
This function adds new steps in-between existing steps.
1. Get the step insert mode.
Press the Insert button on the Program Select Edit screen.