ESPEC SCP-220 - End Timer Setup

PLATINOUS SERIES CONTROLLER MANUAL
37
5. Save the start timer.
Press the Save button. A message confirming whether to execute the operation or
not will be displayed on the screen.
Yes button
: Saves the timer setup.
No button
: Returns the display to the Timer Setup screen
without saving the timer setup.
If you press the Cancel button, a message confirming whether to ignore timer setup
or not is displayed.
Yes button
: Returns the display to the Timer Setup screen
without saving the timer setup.
No button
: Returns the display to the Start Timer Setup
screen.
5.1.2. End Timer Setup
1. Get the chamber setup mode.
Press the Chamber Setup box on the main menu.
TEMP.