PLATINOUS SERIES CONTROLLER MANUAL
27
2. Select the first in the range of steps to copy.
Display the first step to copy with the page scroll buttons and press the Step No. box of that
step.
Range
Number of steps : 1 ~ 49
First step to copy : 1 ~ last step in program
Last step to copy : First step to copy ~ last step in program
Copy destination step : 1 ~ Last step in program + 1
3. Select the last step in the range of steps to copy.
Display the last step to copy with the page scroll keys and press the Step No. of that step.
4. Select the step where to copy in the selected range.
Display the destination step with the page scroll keys and press the Step No. box of that step.
5. A message confirming whether to execute the operation or not will be displayed.
Yes button
: Copies the selected range in and returns the
screen to the Copy Step (copy from) screen.
No button
: Returns the screen to the Copy Step (copy to)
screen without copying the selected steps into the
program.
6. If finished copying steps, press the End Close button.
To Next Page
Loading...
Need help?
General
