4 Edit 75
Edit Step Times Blind
It is possible to edit the times blind, for each step of a Sequence or Stack. This is done with
the EDIT function.
Step 1: Press EDIT
Step 2: Press TIME.
Step 3: Now press a bump button for a sequence. You will get this display.
Step 4: Use encoder wheel 3 to select [Single step]. Press (MENU) to confirm.
Step 5: Use encoder wheel 3 to select a step.
Press (MENU) to confirm.
Step 6: Use the encoder wheels to set times for the selected step. Exit the menus when
done.
Step 7: Done. Press EDIT to exit.
Menu choice Console Feedback
UP Wheel 1 Up time
DOWN Wheel 2 Down time
WAIT Wheel 3 Wait time
To Next Page
Loading...
