76 SmartFade ML v3.0.1 User Manual
Global Time For All Steps
It is possible to edit the times globally for all steps of a Sequence or Stack. This is set with
the EDIT functions. All previous timing information is replaced and cannot be undone.
Step 1: Press EDIT
Step 2: Press TIME.
Step 3: Now press a bump button for a sequence. You will get this display.
Step 4: Use encoder wheel 3 to select [All steps]. Press (MENU) to confirm.
Step 5: Use the wheels to set Global Timing for all steps of the select Sequence or Stack.
Step 6: Press (MENU) to store.
Press (MENU) to confirm
Step 7: Done. Press EDIT to exit.
Menu choice Console Feedback
UP Wheel 1 Up time for all steps
DOWN Wheel 2 Down time for all steps
WAIT Wheel 3 Wait time for all steps
To Next Page
Loading...
